How To Use A Pole Saw:Complete Guide Of Using Pole Saw

You have a garden full of medium and big trees. The trees need trimming like our beard. You can a hand saw to cut the branches within your reach. But when you can’t reach the higher branches, you are in big trouble. How did you cut a branch that out of your reach? The solution is pole saw! A pole saw is like a normal saw with a long handle. The pole saw is used to cut down the branches that are beyond your reach. It also reduces the danger of getting injured from a cutting job. You will be able to stand on the solid ground with all safety and adjust the bar to trim the highest branches. Just cut the branch and let gravity do all of the work for you. Picking the best Pole Saw for you can be a little bit messy. The factors like the type of pole saw, where it will be used, how it functions, how to keep it running, and safety features, these are some of the things that will be revised before your final choice. There is a wide range of Pole saws to pick from if you are looking for a pole saw. There are battery-powered or cordless, gas-powered and electric-powered pole saw. The pole saw will be a fantastic tool for carrying out common trimming job, if you have a garden with many big trees. Sometimes, this pole saw could be called as “pole chainsaw”. But if you are looking for a lightweight version that is easier to maneuver, you can pick a lighter one. You have tree overhangs, branches, and untidy twigs in your garden, don’t worry! This pole saw will help you to cut through these unwanted hustles in your garden. You can be sure that they will make light work of a hard task. A pole saw is a useful tool if you have a lot of long trees. In this article, we decided to discuss how to use a pole saw.

how to use a manual pole saw

How To Use a Pole Saw?

Along with these injuries, tree damage from rips and tears and incorrect pruning angles can also occur without proper training for pole saws. Despite the risks, these machines are a great asset to have in any arborist toolkit. They seem to be getting plenty of use in the storm clean-up operation as they can distance the operator from the hazard and allow users to cut hanging branches into small, more manageable sections. The early pole saws were essentially a small chainsaw head available as an attachment for the end of a brush cutter and didn’t have many safety features and refinements. This initial concept is unchanged to date; you can still buy multi-purpose machines that interchange with various implements. However, safety features are now standard and clearly identified in the operator manual as well as on the warning decals on the machine. Guide bar and chain designs have been refined with the bar having a narrow nose and gauge combined with a reduced kickback chain. The power unit’s drive shafts have user-friendly systems built-in to reduce vibration through the operator’s hands and arms, although the main drive shaft tube can be subject to a fair amount of vibration in some machines. There are some excellent support harnesses available for the larger machines that support the weight and load of the machine while still allowing full reach and functionality. These are similar to a rucksack in design and are more substantial than the basic shoulder strap that comes as standard. They reduce the classic neck and shoulder strain that can happen with prolonged use. Machines are available with two- or four-stroke power units, plug-in electrical, and even in rechargeable battery- powered forms.

Operating tips for pole saw:-

In general, these machines are not insulated and unless you have the correct training and certification to work around electrical apparatus then stay well away from overhead power lines. If in doubt call the local power supply company for advice.

Be aware of any legal and environmental restraints such as tree protection legislation and avoid disturbing any nesting birds or wildlife.

Check the machine prior to commence work and check all safety features are working correctly.

Wear the correct PPE: head, ear and eye protection; gloves (anti-vibration if possible); non-snag outer clothing; steel-capped boots with a heavy tread pattern on the sole for grip; chainsaw chaps or pants.

It is recommended that a safe working/ exclusion zone of at least 15m is maintained around the machine while in operation and any bystanders are prevented from entering this zone.

Select a suitable site for fueling and starting the machine as per the recommendations in the operator’s manual.

Keep a firm footing and ensure the worksite is kept clear of fallen limbs and offcuts as work progresses

Before cutting, correctly assess the tension and compression in the wood to avoid trapping the saw.

Plan the sequence of operation and always reduce the weight of the branch gradually as you cut it into manageable sections.

Undercut the branch first and ensure that when making the top cut an overlap occurs to reduce the risk of tearing the bark past the branch collar. The resulting stub can then be cut back cleanly to the branch collar.

Ensure the hook on the underside is in contact with the branch about to be cut at all times when possible.

Always use the machine at an angle of fewer than 60 degrees from horizontal to reduce the risk of injury from falling timber.

Make sure the final cut is just on the outside edge of the branch collar.

Final Verdict:-

we apologize for making this awfully big and boring, but we don’t have any options. We make it long so that you can do your job easily!

fission
 

Click Here to Leave a Comment Below 0 comments

Leave a Reply:

%d bloggers like this: